Nom 002 ssa1 1993

Nom-040-ssa1-1993

REGULATIONS FOR PACKAGING AND PACKAGING 1. Company name. 2. Place, origin. 3. Address of the company. 4. Town. Content. 6. It must be governed by the corresponding sanitary code where the form of presentation of the package is stipulated. 7. Date of elaboration and expiry date or both.depending on the product.
The marking should indicate: The United Nations symbol for containers and/or packages: This symbol should only be used to certify that a given container and package complies with the specifications of the Standard.
Objective: To establish the commercial information requirements that must be displayed on packaging, instructions and labels for electrical, electrical and electrodomestic products when they are marketed within the United Mexican States.
The effects of lead on children may include significant permanent neurological and physiological damage; in addition to other health effects occurring in adults exposed to similar levels of lead.
Therefore, the objective of this standard is to eliminate the risk of intoxication by consumption of lead-contaminated foods derived from the use of tin-lead solder for the sealing of metal containers intended to contain lead.

Nom-130-ssa1-1995

Objective: To establish the commercial information requirements that packaging, instructions and warranties for electronic, electrical and household appliance products must have when they are marketed in the territory of the United Mexican States.
This Mexican Official Standard establishes the specifications to be met by the two types of seals or side seams to be used in the body of three-piece metal containers, which may be seams with electrical soldering or seams with glue or cemented seams. Joints using solder containing lead are strictly prohibited.
Manufacturers of metal containers intended to contain food and beverages, as well as importers and distributors of canned food and beverages, are obliged to comply with this Mexican Official Standard.
Test method In lithographed containers, the seam with lead solder is distinguished by a wide stripe, without lithography, in vertical sense, with a width of 12 to 20 mm. In electric soldering, such stripe shall be 3 to 6 mm. wide. In non-lithographed containers, the lead-soldered seam has an indentation along the seam and two or more notches on the seam. In the case of the electric soldered seam, the seam is slightly raised, less than 3 mm wide and has no notches.

Nom-003-ssa1

NOMs related to Health Prevention and Promotion, once approved by the National Consultative Committee for the Standardization of Disease Prevention and Control (CCNNPCE), are issued and published in the Official Gazette of the Federation and, since they are related to health matters, become effective the day after their publication.
Official Mexican Standard NOM-001-SSA2-1993, which establishes the architectural requirements to facilitate access, transit and permanence of the disabled to medical care facilities of the National Health System.
Modification to Mexican Official Standard NOM-004-SSA1-1993, Environmental Health. Limitations and sanitary requirements for the use and commercialization of lead monoxide (litharge), red lead oxide (minium) and basic lead carbonate (albayalde) Mexican Official Standard NOM-004-SSA1-1993, Environmental Health. Limitations and sanitary requirements for the use of lead monoxide (litharge), red lead oxide (minium) and basic lead carbonate (albayalde).

Nom-024-scfi-1998

MEXICAN OFFICIAL NORM NOM-001-SSA2-1993 THAT ESTABLISHES THE ARCHITECTURAL REQUIREMENTS TO FACILITATE THE ACCESS, TRANSIT AND PERMANENCE OF THE DISABLED TO THE MEDICAL ATTENTION ESTABLISHMENTS OF THE NATIONAL HEALTH SYSTEM.
MEXICAN OFFICIAL NORM NOM-004-SSA1-1993. “ENVIRONMENTAL HEALTH. LIMITATIONS AND SANITARY REQUIREMENTS FOR THE USE OF LEAD MONOXIDE (LITHARGE), RED LEAD OXIDE (MINIUM) AND BASIC LEAD CARBONATE (ALBAYALDE)”.
MEXICAN OFFICIAL STANDARD NOM-006-SSA1-1993. “ENVIRONMENTAL HEALTH. PAINTS AND VARNISHES. PREPARATION OF ACID EXTRACTIONS OF DRY PAINT LAYERS FOR THE DETERMINATION OF SOLUBLE LEAD. TEST METHOD”.
MEXICAN OFFICIAL NORM NOM-008-SSA1-1993. “ENVIRONMENTAL HEALTH. PAINTS AND VARNISHES. PREPARATION OF ACID EXTRACTIONS OF LIQUID OR POWDER PAINTS FOR THE DETERMINATION OF SOLUBLE LEAD AND OTHER METHODS”.
NORMA OFICIAL MEXICANA NOM-015/1-SCFI/SSA-1994, SEGURIDAD E INFORMACIÓN COMERCIAL EN JUGUETES – SEGURIDAD DE JUGUETES Y ARTÍCULOS ESCOLARES. LIMITS OF BIOAVAILABILITY OF METALS IN ARTICLES COATED WITH PAINTS AND INKS. CHEMICAL SPECIFICATIONS AND TEST METHODS.

Acerca del autor

admin

Ver todos los artículos